|
Post by eggames on Jan 2, 2007 16:07:49 GMT -5
I am attempting to make a good WW2 movie, if you have ever read the book "Soider X" you will know what I am talking about. I need to know how to make a cheap, and efficiant way of making blood and gore blow out the back of someones head without hurting the actor.
|
|
|
Post by bryce on Feb 7, 2007 21:44:17 GMT -5
i know of a couple ways, if you want to show it from the back then there is a way that includes compressed air if you want to know it e-mail me privatley at bv_terrorists_are_cowards@yahoo.com because it is my little secret.but from the back there is a way that i could tell also if you want to e-mail me.
|
|
|
Post by bryce on Feb 7, 2007 21:46:19 GMT -5
im sorry i meant if you want to show it from the front there is a way to do it with compressed air.i also know a way from the back. email me at the e-mail above.
|
|
|
Post by eggames on Feb 8, 2007 15:54:40 GMT -5
That works.
|
|
|
Post by bryce on Feb 9, 2007 0:15:56 GMT -5
screw it i will just say it ok you get a piece of pvc pipe that is about 3 to 2 and a half feet long then you need to get a speacial air not so much compresser but shooter it is co2 powered, the handle of it contains those little co2 16 gram canisters and it has a hose on it that is about 6-10 inches long and at the end of the hose it has a cone-like rubber stopper that is meant to go in the end of pipes as a pipe cleaner that end will go in the end of the pvc pipe.now you will need a strong water proof tape i recomend the tape they use on pvc water lines or the air conditioner reflectant tape.once you have an end sealed you have to get a 90 degree or elbow peice at the other end. what i also did for that part was i used just the pipe for under the chin or in the mouth shots so it goes strait up i used it on halloween and scared a couple kids sh*t l*ss.but if you want to do a strait on shot to the fore head then you attach the elbow peice so it goes strait back. once you have the pvc pipe,the elbow on and the pipe cleaner thing all attached properly all you have to do is find a way to secure it to the victims back. i did this by cutting a hole in the back of the shirt for the end with the elbow and the pipe and hose was waist level so i tied a belt tightly around it and put the hose in my sleeve and held it in my hand.now you can fill it with fake blood and brain matter for that what is really good is cut up peices of nylons.and you mix it all together and as soon as you hace the co2 in the handle and the blood in the chamber you are ready for the brains to fly at a pull of the trigger.this is a sooooo much cheaper alternative than buying a compact air mortar like they did in dawn of the dead.if you want to see it in action it is on my myspace page my url is www.myspace.com/volarvich425 check it out its under videoes and if it is on private than just ask me to add you or you can go to videos and type in "brains"thanks for reading and go check it out.
|
|
|
Post by eggames on Feb 10, 2007 11:32:35 GMT -5
Wow, alot of instruction!
|
|
|
Post by bryce on Feb 10, 2007 13:16:37 GMT -5
i know but it is so worth it did you check out the video all you have to do is click on my url and click VIDEOS under my picture.
|
|
|
Post by eggames on Feb 12, 2007 6:52:23 GMT -5
I don't see a picture........
|
|
|
Post by bryce on Feb 13, 2007 23:11:06 GMT -5
it should be there and if it isnt just look for videos
|
|
|
Post by eggames on Feb 14, 2007 7:44:03 GMT -5
No videos either.........
|
|
|
Post by bryce on Feb 15, 2007 0:31:40 GMT -5
are you seirious man well you could go to the homepage of myspace and search under videos for "bryce's brains" try that and hope thet works.
|
|
|
Post by bryce on Feb 15, 2007 0:37:04 GMT -5
it should work now
|
|
|
Post by eggames on Feb 16, 2007 15:40:23 GMT -5
I still don't see it. Were is it supposed to be???
|
|
|
Post by eggames on Feb 16, 2007 15:44:08 GMT -5
Just post a direct link to it.
|
|
|
Post by bryce on Feb 16, 2007 20:09:50 GMT -5
|
|